Like Permaglass FRP BORE CASING, Permaglass FRP PUMP COLUMN is corrosive resistant, lightweight,and extremely strong.
Permaglass FRP PUMP COLUMN is a rigid rising main suitable for submersable pump installations. It will not corrode like steel, and is very quick and easy to install. Permaglass FRP PUMP COLUMN is suitable for pump settings down to 150 metres, (more in some instances, see Technical Data), Please check the maximum weights to select the suitability of Permaglass FRP PUMP COLUMN to your application.
Flanged, threaded or plain Stainless Steel top, and bottom pipes are available - made to any length.
Features / Benefits;
- KWIK-LOK JOINS (very quick and easy to join)
- ANTI-TORQUE NON ROTATING JOINTS
- LIGHTWEIGHT CASING
- CORROSION RESISTANT FRP (or GRP / GRE)
- AUSTRALIAN MADE & OWNED
- GOOD AVAILABILITY
- 3 Mtr or 6 Mtr LENGTHS AVAILABLE
- HANDLES UP TO 100 DEG C without DERATING
Note:
- Safety Cables should always be used.
- Care should be taken when allowing total weight applied to Permaglass FRP PUMP COLUMN to ensure the service is within parameters specified above.
- Consult manufacturer for ant applications of heavier duty than those specified.
Fittings & Adapters
- LIFTING TOOLS
- FLANGES
- REDUCERS
- THREADED / PLAIN ADAPTERS
( Flanges and reducers can be 316/304 Stainless Steel or FRP)
BSP Threads are used on all threaded adapters, unless requested otherwise. (price may vary for alternative types)
- Ensure groove is clean before inserting Cable
- Insert Locking Cable through until inserted end has visibly passed right around the pipe circumference in the groove.
- Apply suitable lubricant to installed O'ring.
- Fit clamps under female "Bell"
- Anti- torque Hexagonal joint
|
